Bluetooth Speaker Kit DIY Soldering Project Spectrum USB Electronic Amplifier Home Stereo Speaker DIY Kit for Leaning Soldering
Bluetooth Speaker Kit DIY Soldering Project Spectrum USB Electronic Amplifier Home Stereo Speaker DIY Kit for Leaning Soldering
gtooza.com
Couldn't load pickup availability
Share
Type : Voltage Regulator
diymore
Features
1.Composed of Bluetooth stereo module, power amplifier chip, music spectrum, 132 colorful LED and other components
2.It can be connected to Bluetooth to play music and supports stereo output
3.Equipped with a 3.5mm audio signal input port, supporting wired connection to devices such as computers and mobile phones
4.When inserting an audio cable, it automatically switches to the audio cable signal and is not affected by Bluetooth sound interference
5.Music spectrum display, rich colors, and beautiful music
Parameters:
Product Name: LED Bluetooth Audio Kit
Working power supply: USB power supply 5V (recommended to use 5V2A fast charging head)
Working voltage: DC5V
Working current: Mute less than 10mA, full load not less than 500mA
PCB length: power amplifier board 91x43mm spectrum board 91x62mm
Bluetooth button operation instructions
Short press K1: Turn Bluetooth function on or off (. Turn Bluetooth function on automatically when powered on)
Short press K2: Previous song
Long press K2: Volume-
Short press K3: Next song
Long press K3: Volume+
Function Introduction: A dedicated audio spectrum display driver chip with built-in multiple decoding algorithms, and a memory function that can permanently maintain user set parameters.
Working mode selection: The chip enters normal working state after being powered on. If there is audio input, the screen will display the spectrum. Enter work mode selection: In normal working mode, regardless of whether the screen is displayed or not, press and hold the 'Function button' for about 1-2 seconds to enter the 'Work mode selection' state. At this time, the screen displays' Sound ', indicating entering the' Channel selection 'mode. Long press the "Function Button" to change the set working mode and enter the next working mode selection. Short press to change the "option" of the working mode, which will be displayed on the screen. You can set your own working mode according to your needs. Exit working mode selection: After setting the desired working mode, there is no need to perform any further operations. After 5 seconds, the chip will exit the working mode selection state and enter the normal working state. Special reminder: If connected to a single speaker and set to mono mode, the display effect will be better.
Package include:
LED Bluetooth speaker kit * 1







