Перейти к информации о продукте
1 из 6

DIY Red Blue Double Color Flashing Lights Kit Strobe NE555 CD4017 Practice Learning DIY Kits Electronic Suite

DIY Red Blue Double Color Flashing Lights Kit Strobe NE555 CD4017 Practice Learning DIY Kits Electronic Suite

gtooza.com

Обычная цена $0.78 USD
Обычная цена $1.17 USD Цена со скидкой $0.78 USD
Распродажа Продано
Package : DIY Red Blue Double Color Flashing Lights Kit
is_customized : Yes
DIY Red Blue Double Color Flashing Lights Kit
Operating Temperature : DIY Red Blue Double Color Flashing Lights Kit
Dissipation Power : DIY Red Blue Double Color Flashing Lights Kit
Supply Voltage : DIY Red Blue Double Color Flashing Lights Kit
Application : DIY Red Blue Double Color Flashing Lights Kit
Condition : New
Type : Logic ICs


This suite adopts simulation light circuit made with NE555 and CD4017,the blue LED and red LED flashed alternately according to the pulse. The multivibrator composed of NE555 will have a certain frequency of oscillation signal send to CD4017 decimal counter/pulse distributor,in order to count. When the 1,3,5 pulses arrive Q0,Q2,Q4 output high level in turn,blue LED flashes 3 times,Q5,Q7,Q9 output high level in turn.Red LED flashes 3 times,blue LED flashes again when 11,13,15 pulses come,blue and red LED flashes alternately circulatory,so as to like the alarm lamp.Change the RP1 size can change the oscillation period, thus changing the LED shining speed, the whole circuit DC9-12V can be worked.



Red flashing light and blue flashing light form a board separately,connected with the main board through the stamp hole.If you need to install to other place separately or increase the distance,you should cut off through the stamp hole,then connect with the mother board by two wires.Please pay attention to the direction of LED when installing,especially the direction of L11 and L12.The R2 and R3 controls with the brightness of light,you can change it appropriately ,the range is 10-100 ohm.


supply power : 9-12V


NOTE:There is no IC socket in kits.User can weld IC on PCB Directly.


Metal film resistor R1,R4,R5 10Kohm 3

Metal film resistor R2,R3 10-100ohm 2

Blue LED       L1-L12 5mm        12

Red LED       L13-L14 5mm       12

Diode1N4148       D1-D6                 6

NE555               IC1        DIP8         1

CD4017               IC2        DIP16         1

S8050               Q1,Q2      TO-92         2

Adjustable resistor RP1 200K-1M         1

Electrolytic capacitor C1 0.1uf-1uf 1

Ceramic capacitor C2 0.01uf103 1

PCB                                         1




Просмотреть всю информацию